Tramex
Showing 25–44 of 44 results
-
Tramex
Infrared Surface Thermometer
The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms. It is used to measure and display surface temperatures within the range of -50°C to 650°C (-58ºF to 1202ºF) and has an accuracy of approximately 1 to 1.5% (see Specifications for details). The IRT2 has a fast response time (0.15 sec) and is powered with a 9V battery and complies with Class II UK/EU laser safety standard EN60285.
Features
Rapid detection function
Precise non-contact measurements
Dual laser sighting
Automatic Data Hold
User selectable ºC or ºF
Emissivity digitally adjustable from 0.10 to 1.0
MAX temperature display
Backlight LCD display
Trigger LOCK for continuous use
Set high and low alarms
Unique flat surface, modern housing designSKU: n/a -
Tramex
Moisture and Humidity Meter (digital)
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. It also attaches to an optional plug-in Tramex Hygro-i2 ® relative humidity probe and heavy-duty pin type electrodes. Suitable for many industries including Water Damage Restoration, Flooring, Indoor Air Quality, Home Inspection and Pest Control.
Features
Features
Digital, non-destructive moisture meter.
Deep signal penetration to over 25mm (1″) into the materials being tested without the need to damage the surface. Signal penetration depends on material being tested and meter setting.
Specific gravity adjustment for wood species.
External Rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability.
Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials.
Backlit, large, clear, easy to read LCD display.
“Hold” function enables user to “freeze” the reading. Useful for taking readings when the meter face is not visible.
Switchable “On” or “Off” audio warning tone.
Automatic power cutoff switches “Off” when not in use.
Automatic default to last user setting when switched back on.
Battery operated (included).
Attaches to plug-in wood probe (optional).
Attaches to plug-in Tramex Hygro-i2 ® relative humidity probe for relative humidity, temperature, dew point and mixing ratio readings (optional).SKU: n/a -
Tramex
Moisture Encounter Plus
The Moisture Encounter Plus is a versatile and accurate tool that can be utilised by many different industries including flooring installation, building inspection, surveying and pest control.
The Moisture Encounter Plus provides highly accurate and quick results about all of its versatile options. The display screen is large and easy to read, but you can also freeze any reading if you are in a position that makes it difficult to access the display.
Features:
– Non-destructive moisture measurements
– Three sensitivity ranges: wood/timber, drywall/roofing and plaster/brick
– Hold feature to freeze readings
– Large display screenSpecifications:
– Readings of five to 30 percent on wood scale
– Readings of zero to 100 on all other scales
– Signal penetration up to 30 mm
– Ships with the necessary batterySKU: n/a -
Tramex
Professional PTM2.0 Pin Meter
The all new Professional PTM 2.0 is a hand-held, digital, pin-type resistance moisture meter designed to take precise measurements of moisture content in wood, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building products. The Professional PTM 2.0 has built-in standard calibrations, specific calibration for over 500 wood species and adjustable temperature correction.
Features
Built-in calibration for 500+ wood species or standard calibration selection.
Wide moisture content range: 6 – 46% and digital readout to 0.1% accuracy
Adjustable temperature correction
Built-in calibrations checks for confirmed accuracy
Reading ‘Hold’ facility
Save up to 100 readings for max, min, average and standard deviation statistics
Colour LCD screen with brightness adjustment for low-light operation
Heavy-duty, light-weight aluminium construction
Built-in pins and optional external handheld and hammer probes availableSKU: n/a -
Tramex
Professional Wood Inspection Kit
A kit for instant and accurate measurement of moisture content in a large range of wood species, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building materials. Featuring the Tramex Professional PTM2.0 with its built-in pins and a handheld heavy-duty pin probe, the Professional Wood Kit comes in a protective Tramex Easy-travel case.
Features
Built-in calibration for 500+ wood species or standard calibration selection.
Wide moisture content range: 6 – 46% and digital readout to 0.1% accuracy.
Adjustable temperature correction. Reading “Hold” facility to freeze reading.
Save up to 100 readings for max, min, average and standard deviation statistics.
Colour LCD screen with brightness adjustment for low-light operation
Heavy-duty yet light-weight aluminum construction.
Built-in calibration checks for confirmed accuracy.
Battery powered. (supplied)
Built-in pins and socket for use with a choice of external pin probes. (optional)SKU: n/a -
Tramex
Professional Wood Master Kit
A kit for instant and accurate measurement of moisture content in a large range of wood species, relative drywall readings and comparative WME (Wood Moisture Equivalent) readings in wood by-products and other building materials.
Featuring the Tramex Professional PTM2 with its built-in pins, a handheld heavy-duty pin probe and a handheld heavy-duty hammer pin probe, the Professional Wood Master Kit comes in a Tramex protective heavy-duty carrying case with die-cut foam lining.
Features
Built-in calibration for 500+ wood species or standard calibration selection.
Wide moisture content range: 6 – 46% and digital readout to 0.1% accuracy.
Adjustable temperature correction.
Reading “Hold” facility to freeze reading.
Save up to 100 readings for max, min, average and standard deviation statistics.
Colour LCD screen with brightness adjustment for low-light operation
Heavy-duty yet light-weight aluminum construction.
Built-in calibration checks for confirmed accuracy.
Battery powered. (supplied)
Built-in pins and socket for use with a choice of external pin probes. (optional)SKU: n/a -
Tramex
Roof Inspection Kit
The Roof Inspection Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth, as well as non-destructive measurement of moisture conditions in concrete decks, wood decks and ambient relative humidity & dew-point conditions. Featuring the handheld Tramex RWS Roof and Wall Scanner non-invasive impedance scanner and the Tramex CMEX II electronic moisture meter and Hygro-i ® relative humidity probe. This kit comes in a protective, heavy-duty carrying case with die-cut foam lining.
Features of the RWS
For non-destructive moisture evaluation of roofs, EIFS, foam insulation systems & other building envelope applications.
Detects, locates and traces leaks in concrete flooring.
To evaluate the extent of the moisture problem and help trace and pin-point its source.
Multi-mode functions allowing for depth penetration and sensitivity selection.
Fast and easy to operate giving instant clear readings.
“Hold” function facilitates ease of recording readings.
Lightweight, handheld and battery operated.
Inexpensive to purchase and operate compared to other non-destructive testing methods.
Features of the CMEX IIMeasures up to 6.9% Moisture Content in Concrete.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
Attaches to a relative humidity Hygro-i ® probe for in-situ testing of concrete and ambient conditions.
7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment.SKU: n/a -
Tramex
Skipper Meter Plus
The Tramex Skipper Plus non-destructive moisture meter provides a complete, safe method for detecting excess moisture in GRP and wooden boats. A pocket-sized moisture meter, the Skipper is designed to locate moisture in boat hulls and fittings.
Features
Three ranges for detecting moisture in GRP and hardwood for salt & freshwater.
Wide range of readings for wood of 5% to 30% on hardwood scale and 0 to 100 on comparative scale for GRP and other materials
Identifies the presence of osmosis in GRP hulls.
Confirms if wooden boats are dry enough for painting or varnishing.
Trace deck and bulkhead leaks.
“Hold” function facilitates ease of recording readings
Soft rubber electrodes make direct contact without scratching.
High moisture audio warning tone that can be switched on or off.
Battery operated (included)SKU: n/a -
Tramex
Water Damage Restoration EZ Kit
A compact kit for instant and precise non-destructive testing of moisture conditions in numerous building materials such as concrete and other cementitious materials per ASTM F2659, as well as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the the Tramex MEP non-destructive overall building inspection moisture meter, and the Tramex CME4 concrete moisture meter. The Water Damage Restoration EZ Kit comes in a Tramex Easy-travel case.
Features of the CME4
Clear easy-to-read analog dial.
No need to probe, drill or mechanically damage the surface.
Instant and accurate readings deep into the surface. Non-destructive in operation.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible and for easy recording of readings.
Reproducible results.
Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
Features of the MEPWide range of readings for wood from 5% to 30%.
Deep signal penetration up to 11⁄4” (30mm) into the materials being
tested without the need to damage the surface.
Three ranges of sensitivity: Wood, Timber / Drywall, Roofing / Plaster,
Brick – making it ideal for testing various building materials.
Detects moisture through paint, wall coatings, drywall, ceramic tiles,
floor coverings, wood, roof coverings and ceiling tiles.SKU: n/a -
Tramex
Water Damage Restoration Inspection Kit
A complete kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the Tramex MEP moisture meter for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX2 digital concrete moisture meter allows for testing per ASTM F2659 and the reusable Hygro-i ® probe for testing relative humidity, temperature and dew point in the environment, or performing ASTM F2170 (or Hood Method with optional Hood) for relative humidity readings in concrete slabs. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Hygro-i ® probe. A heavy-duty pin-probe measures Moisture Content in wood. The Water Damage Restoration Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
Features of the CMEX II
Measures up to 6.9% Moisture Content in Concrete.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
Attaches to a relative humidity Hygro-i ® probe for in-situ testing of concrete and ambient conditions.
7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment.
Features of the MEPWide range of readings for wood from 5% to 30%
Deep signal penetration up to 1¾” (30mm) into the materials being tested without the need to damage the surface.
Three ranges of sensitivity: Wood, Timber / Drywall, Roofing / Plaster, Brick – making it ideal for testing various building materials.SKU: n/a -
Tramex
Water Damage Restoration Master Kit
The ultimate Tramex kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the Tramex MEP moisture meter for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX II digital concrete moisture meter allows for testing per ASTM F2659 and the reusable Hygro-i2 ® probe for testing relative humidity, temperature and dew point in the environment, or performing ASTM F2170 (or Hood Method with optional Hood) for relative humidity readings in concrete slabs. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Hygro-i ® probe. A heavy-duty pin-probes measures Moisture Content in wood. The Water Damage Restoration Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
Features of the CMEX II
Measures up to 6.9% Moisture Content in Concrete.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
Attaches to a relative humidity Hygro-i2 ® probe for in-situ testing of concrete and ambient conditions.
7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment.Features of the MEP
Wide range of readings for wood from 5% to 30%
Deep signal penetration up to 1¼” (30mm) into the materials being tested without the need to damage the surface.
Three ranges of sensitivity: Wood, Timber / Drywall, Roofing / Plaster, Brick – making it ideal for testing various building materials.SKU: n/a