Recommended Products
Ultrasnap for SystemSURE II / Plus
UltraSnap™ is a user-friendly, all-in-one ATP sampling test used with Hygiena luminometers. This pen-sized sample collection device is easy to use, small, and environmentally friendly. In addition, UltraSnap uses a unique liquid-stable reagent providing superior accuracy, longer-lasting signal strength, and more reproducible results
Shop
Showing 25–48 of 133 results
-
Hygiena ATP
AquaSnap Total ATP in Water Swabs
AquaSnap™ Total measures both free ATP in solution and microbial ATP. The device contains a detergent to release ATP that is bound to microbial or organic matter and inside microbes. AquaSnap is easy to use, economical, and gives real time results. The specifically designed dipper tip collects 100 µl of water ensuring consistent sample collection.
SKU: HG-AQ100X -
Particles Plus
AS-1000 – Air Sampler 1000 Series
Small in size, simple to use and easy to operate, the Air Sampler 1000 Series is ideal for personal sampling applications. Only weighing 0.55 lbs. this provides a flow range between 1000 – 3000 ml/min. The 1000 Series allows for constant flow correction even with changes in ambient temperature and barometric pressure through the Particle Plus ultra-quiet rotary vane vacuum pump technology. The easy-to-read LED display provides accumulated sampling volume and a battery conservation mode after 30 seconds of idle use allowing for over 30+ hours of continuous sampling.
SKU: n/a -
Protimeter
Basic Survey;MMS2 instrument & primary accessories in pouch
The Protimeter MMS2 is the industrys most advanced all-in-one moisture meter. Its ergonomic, 4-in-1 design allows one-handed operation to measure moisture on and below the surface, as well as in ambient air and humidity and in concrete floor slabs. A non-contact infrared thermometer measures surface temperature and calculates the dew point. The MMS2 incorporates instant moisture measurement using pin and non-invasive techniques to provide accurate readings in wooden floors and reference reading in concrete floor slabs.
Features:
- Pin Point Measurement.
- Non-invasive moisture measurement.
- Ambient relative humidity and temperature measurement.
- Equilibrium humidity measurement in concrete floors.
- Psychrometric calculations.
- Laser pointer surface non-contact temperature measurement.
- Data Logging.
- Firmware upgradable.
Benefits:
- Easy to use with simple user interface.
- One instrument with all floor moisture testing capabilities.
- Durable construction with a 2 year warranty.
- Free technical support.
SKU: n/a -
Tramex
Building Survey Inspection Kit
This complete moisture and humidity testing kit features the multifunctional Tramex MRH III digital moisture meter allowing for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing.
The MRH III and reusable relative humidity probe allow for testing relative humidity, temperature and dew point in the environment. When used in conjunction with the infrared surface thermometer, detrimental condensation conditions conducive to microbial growth can also be identified. The heavy-duty pin-probes measure moisture content in wood, and the insulated 7” pins allow for deep wall cavity probing. Concrete slab relative humidity testing to ASTM F2170 can also be performed with reusable relative humidity probes and hole liners (optional).
Features
Deep signal, non-destructive penetration up to 1¼” in wood and drywall in non-destructive mode.
Detects moisture through paint, wall coverings, drywall, ceramic tiles, floor coverings, wood, roof coverings and most building materials.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
Audio signal sounds when meter indicates high readings.
Large clear backlit digital display giving meaningful readings.
Accurate non-invasive moisture content readings from 5 to 55% MC in wood.
Attachable pin-type wood probe for accessing hard to reach areas and for probing into wall cavities and wood.
Attachable Relative Humidity probe for testing of relative humidity, temperature, dew point and grains per pound readings all shown on one clear display, (as well as in situ of concrete per ASTM F2170 with optional Hygro-I probes, hole liners and caps).SKU: n/a -
Tramex
CMEX II Digital Meter
A digital version of the CME4 handheld electronic moisture meter, the Tramex CMEX II moisture meter is designed for the instant and precise measurement of moisture content in concrete and other floors and screeds. Incorporating plug-in ports for the optional Hygro-i ® relative humidity probe and heavy-duty pin-type wood probe, this moisture meter transforms into the ideal all-in-one instrument for the flooring professional.
Features
Measures up to 6.9% Moisture Content in Concrete.
Large clear backlit digital display.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment. (optional)
Attaches to a relative humidity Hygro-i ® probe for in situ testing of concrete to ASTM F2170. (optional)SKU: n/a -
Tramex
Concrete Encounter CME5
The Tramex Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds. Easy-to-use, giving precise and repeatable results, the Concrete Moisture Encounter allows the user to make multiple tests over a large area in the shortest possible time.
Features:
Non-destructive in operation with no need to probe, drill or mechanically damage the surface.
Clear easy-to-read analog dial.
Instant and precise readings to a depth of approximately 3⁄4″ into the slab.
Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.
Reproducible and reliable results.
Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
Rugged ergonomically designed enclosure.SKU: n/a -
Tramex
Concrete Encounter Plus CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering.
Excess moisture in the concrete could cause latent problems such as condensation or failure of the adhesive under the floor covering.
The Concrete Encounter CME4 will give you an instant reading of moisture content to over 6% for Concrete and 0 to 10 comparative for Gypsum floor screeds enabling you to make an informed decision on when to install the floor covering.
To use, simply switch on and press down the instrument firmly against the surface. Carry out unlimited non-destructive tests in seconds without the need to drill or damage the concrete.
Features:
– Instant Readings
– Non-destructive in operation
– No need to probe or drill or mechanically damage the surface
– Reproducible results
– Battery Operated
– Pocket Sized
– Clear, easy to read analogue dial
– b, robust, electrodes and body
– Reading Hold functionSKU: n/a
