Concrete Encounter CME5
The Tramex Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds. Easy-to-use, giving precise and repeatable results, the Concrete Moisture Encounter allows the user to make multiple tests over a large area in the shortest possible time.
Non-destructive in operation with no need to probe, drill or mechanically damage the surface.
Clear easy-to-read analog dial.
Instant and precise readings to a depth of approximately 3⁄4″ into the slab.
Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.
Reproducible and reliable results.
Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
Rugged ergonomically designed enclosure.SKU: n/a
Moisture and Humidity Meter (digital)
The Tramex MRH III Moisture and Humidity Meter is a hand-held digital moisture meter calibrated for most building materials. It also attaches to an optional plug-in Tramex Hygro-i2 ® relative humidity probe and heavy-duty pin type electrodes. Suitable for many industries including Water Damage Restoration, Flooring, Indoor Air Quality, Home Inspection and Pest Control.
Digital, non-destructive moisture meter.
Deep signal penetration to over 25mm (1″) into the materials being tested without the need to damage the surface. Signal penetration depends on material being tested and meter setting.
Specific gravity adjustment for wood species.
External Rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability.
Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials.
Backlit, large, clear, easy to read LCD display.
“Hold” function enables user to “freeze” the reading. Useful for taking readings when the meter face is not visible.
Switchable “On” or “Off” audio warning tone.
Automatic power cutoff switches “Off” when not in use.
Automatic default to last user setting when switched back on.
Battery operated (included).
Attaches to plug-in wood probe (optional).
Attaches to plug-in Tramex Hygro-i2 ® relative humidity probe for relative humidity, temperature, dew point and mixing ratio readings (optional).SKU: n/a
Concrete Encounter Plus CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering.
Excess moisture in the concrete could cause latent problems such as condensation or failure of the adhesive under the floor covering.
The Concrete Encounter CME4 will give you an instant reading of moisture content to over 6% for Concrete and 0 to 10 comparative for Gypsum floor screeds enabling you to make an informed decision on when to install the floor covering.
To use, simply switch on and press down the instrument firmly against the surface. Carry out unlimited non-destructive tests in seconds without the need to drill or damage the concrete.
– Instant Readings
– Non-destructive in operation
– No need to probe or drill or mechanically damage the surface
– Reproducible results
– Battery Operated
– Pocket Sized
– Clear, easy to read analogue dial
– b, robust, electrodes and body
– Reading Hold functionSKU: n/a$688.50