Based on 0 reviews
Be the first to review “Water Damage Inspect. Kit with MRH3 & Hammer Probe”
Related products
-
Tramex
Concrete Encounter CME5
The Tramex Concrete Moisture Encounter is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659 and giving comparative or equivalent readings in other cementitious floor screeds. Easy-to-use, giving precise and repeatable results, the Concrete Moisture Encounter allows the user to make multiple tests over a large area in the shortest possible time.
Features:
Non-destructive in operation with no need to probe, drill or mechanically damage the surface.
Clear easy-to-read analog dial.
Instant and precise readings to a depth of approximately 3⁄4″ into the slab.
Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.
Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.
Reproducible and reliable results.
Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
Rugged ergonomically designed enclosure.SKU: n/a -
Tramex
Concrete Encounter Plus CME4
Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering.
Excess moisture in the concrete could cause latent problems such as condensation or failure of the adhesive under the floor covering.
The Concrete Encounter CME4 will give you an instant reading of moisture content to over 6% for Concrete and 0 to 10 comparative for Gypsum floor screeds enabling you to make an informed decision on when to install the floor covering.
To use, simply switch on and press down the instrument firmly against the surface. Carry out unlimited non-destructive tests in seconds without the need to drill or damage the concrete.
Features:
– Instant Readings
– Non-destructive in operation
– No need to probe or drill or mechanically damage the surface
– Reproducible results
– Battery Operated
– Pocket Sized
– Clear, easy to read analogue dial
– b, robust, electrodes and body
– Reading Hold functionSKU: n/a -
Tramex
Data Logger Feedback EZ Lit
The Tramex Feedback DataLogger and App have been designed and developed by Tramex for professionals who depend on accurate, reliable readings using the very best, state of the art technology and performing ASTM F2170. The Feedback DataLogger and App log up to 100,000 data point entries for relative humidity, temperature, dew point and grains per pound, transmitted wirelessly via Bluetooth BLE technology to your mobile device. On the App you can visualize Live Readings, Thermal Conditions and Psychrometric Charts, as well as creating and exporting spreadsheets, charts and reports. The Tramex Feedback DataLogger requires the Tramex Feedback Data Logger App and a compatible iOS or Android mobile device.
FEATURES
Bluetooth BLE enabled for use with mobile devices.
Up to 100,000 data point entries possible.
Instant set up and start modes. Used to perform ASTM F2170.
Ambient and In-situ RH and temperature logging
Intuitive and instructive APP interface.
Adjustable interactive chart, spreadsheet, report and easy-export functions.
Connectivity up to 165ft (50 meters) for highly accessible data downloads.SKU: n/a
There are no reviews yet.